Valhalla Industries – Multifunctional Muzzle Device Thor Mk 2L 7.62 mm | 5/8×24 – Black

Multifunctional Muzzle Device Thor Mk 2L 7.62 mm | 5/8×24 Valhalla Industries Black

A sound moderator screwed onto a 5/8×24 thread for 7.62mm, 6.5mm Creedmoor, and .308 Win caliber rifles. The design of the discharge device is based on a series of components welded together. They are connected in a precise manner, so that it can perform its function of reducing noise due to escaping exhaust gases.

The device is made entirely of stainless steel, with the first segment having holes and the subsequent segments having notches. This solution allows to reduce noise and reduce the toss of the weapon. Screwing on the thread is simple, and thanks to the large number of coils the moderator can be securely seated on the weapon. The device from the outside has been covered with a protective coating, which increases protection against external factors.

The internal design of the discharge device facilitates maintenance. Thus, the use of proven weapon cleaners allows the moderator to maintain its effectiveness. The design of the suppressor allows the trouble-free use of ammunition with higher initial energy. This allows noise reduction of up to 28 dB, for .308 Win / 180 gr ammunition in a 24" barrel.

The specially shaped internal geometry limits the return of powder gases into the breech chamber. As a result, it helps effectively protect the user’s hearing and maintain the correct operation of the weapon’s automatics. In addition, the suppressor can be enhanced with an accessory heat shield. For this model, it may not fully cover the length of the moderator, but should still support the operation of the device under high load.

Features:

• Sound suppressor for rifles in 7.62mm, 6.5mm and .308 Win caliber
• Screws onto a 5/8×24 thread
• For use on barrels from 13" in length
• Noise reduction of up to 28 dB, depending on caliber, barrel length and ammunition used
• Welded stainless steel construction, resistant to mechanical damage and high temperatures
• External coating for protection against external influences
• Simplified maintenance of the discharge device
• Internal geometry limiting the return of powder gases to the breech chamber
• Noticeable reduction in weapon recoil and blast during firing
• Compatible with heat shield